HYDAC 0950R010BN4HC Filter Element
|Payment Type:||L/C,T/T,D/P,Paypal,Money Gram,Western Union|
|Terms of Trade:||FOB,CFR,CIF,EXW,FCA,CPT,CIP|
|Min. Order:||200 Piece/Pieces|
|Delivery Time:||10 Days|
|Packaging:||Plywood box or standard export packing|
|Place of Origin:||XINXIANG, CHINA|
Model No.: FST-RP- 0950R010BN4HC Filter Element
FST-RP- 0950R010BN4HC Filter Element (Replacement):
HYDAC 0950R010BN4HC series filter elements, the natural strength of the filter material and both sides of the solid structural support, compatibility with the liquid, allowing a wide range of pressure differences.
Characteristics and advantages:
Different filter materials are made of single or multilayer metal mesh and filter material. The number of layers and the number of mesh are determined according to different use conditions and uses. It can be used to filter the return oil of low pressure oil return pipeline filter. When the filter core is blocked by pollutants or the system liquid temperature is too low, and the flow rate fluctuates and other factors cause the oil intake pressure to be 3bar, the bypass valve brought by the filter core opens to work. Used to protect specific components in hydraulic system and the normal operation of hydraulic system.
FST-0950R010BN4HC series filter element, the size is completely interchangeable, can replace the original factory product completely, achieves the original factory filtration effect. This series of filter elements are produced by American imported filter material. The filter material is used to remove the worn metal powder and other mechanical impurities in the hydraulic system oil circuit to keep the oil circuit clean and prolong the hydraulic system life.
The main advantages:
(1) A new filter material is made for the filter element. The multi-layer filtration structure ensures the ability of separation of high contamination and dirty pollution, uniform texture, corrosion resistance and fatigue resistance.
(2) Innovating longitudinal joint technology and perfectly joining the end of filter material, especially under different loads, the effective value can prevent suspended particles from entering the filter zone from the dirt area.
(3) In the operation of filter element, the static electricity can be derived below the safe value, and the continuous formation of black carbon or the formation of silt oil can be excluded.
(4) The original imported filter media has uniform aperture, low resistance and large dust capacity.
(5) Germany imported composite filter folding machine to increase the effective filter area.
(6) Oil and temperature resistant cyclopropyl resin adhesive. The seal is firm.
(7) Thickened steel plate skeleton. Strong pressure drop resistance.
(8) To leave the factory after passing the inspection. The quality is reliable.
1.Thermal power and nuclear power industry: gas turbine, boiler lubrication system, speed control system, bypass control system oil purification, feed water pump, fan and dust removal system purification.
2. Metallurgical industry: for rolling mill, continuous casting machine hydraulic system filtration and various lubricating equipment filtration.
3. Petrochemical industry: oil refining, separation and recovery of products and intermediate products in chemical production, purification of liquid, magnetic tape, optical disc and photographic film in manufacture, filtration of oil well water and natural gas.
4. Processing equipment: paper machinery, mining machinery, injection molding machine and large precision machinery lubrication system and compressed air purification, tobacco processing equipment and spraying equipment dust recovery and filtration.
Filter element type
High efficiency folding filter
Resin consolidated glass fiber high efficiency filter material mixed with Wire mesh
Glass fiber filter material
1, 3, 5, 5, 7, 10, 12, 22 microns available
Internal support and end cover material
Metallized tin / reinforced nylon / stainless steel
FST- RP-0060R010BN4HC filter element instead of HYDAC hydraulic oil filter element execution standard:
ISO2491 filter-rupture resistance experiment:
The test of resistance to rupture of filter element belongs to the strength test of the filter element itself. The filter element is generally subjected to external force by the pressure difference limit after carrying the dirt in the filter shell. The inner skeleton is the main support of the filter layer under the limit pressure difference of the filter element, and the collapse of the skeleton will lead to the collapse of the filter layer.
ISO2492 filter element structural integrity experiment:
The significance of the requirement of the integrity of the filter element structure, the filter material is very good, the filter material is broken or made incomplete in the process of making the filter element, the incomplete phenomenon mainly manifests in: the filter material is damaged, the end cover is not glued strictly, the filter material butt joint is not strict and solid. It will greatly affect the original filtering accuracy.
ISO2493 filter element the compatibility betwee material and liquid experiment:
The compatibility test between filter element and working fluid is mainly a validation test of the properties of raw materials used in the process of making filter elements, such as compatibility with petroleum, water diol, water-oil emulsion and liquid with high water content. PTFE seals are standard configurations and can be used in conjunction with industrial phosphate, diesters and specific synthetic materials.
ISO3726 filter element experimental method of the end load:
The end load test of the filter element mainly tests the ability of bearing the axial mounting force, the strength, the axial load, the flattening strength and so on.
ISO3724 filter element the determination of fatigue characteristics:
The test of the fatigue characteristics of the filter element is the test of the life of the filter element. The filter element works in the hydraulic system, withstanding the reciprocating and alternating fluid flow of the system and the pressure impact of the working flow. Under this impact, if the filter element has accumulated pollutants and established a greater pressure difference, then the pressure of the filter layer withstanding the fluid flow will be greater.
ISO3968 filter element determination of flow characteristics and the pressure difference:
The pressure drop flow characteristic is usually an assessment of the filter, but in fact, it mainly evaluates the flow rate and resistance of the filter core. Of course, in the design of filter assembly, there are flow and bypass problems in the channel design of the shell. But after all, it is not the main problem, the main problem is the filter, so the standard mainly checks the filter, not the filter.
The replacement of HYDAC company hydraulic filter type Series: (FST- RP-xxxxxxxx)
0950R003BN / HC
0950R005BN / HC
0950R010BN / HC
0950R020BN / HC
0850R003BN / HC
0850R005BN / HC
0850R010BN / HC
0850R020BN / HC
Sinofiltec technology Co.,Ltd has the perfect testing equipment and quality assurance system, has passed the ISO9001-2008 quality system certification. our products are widely used in aerospace navigation, petroleum and petrochemical industry, oil and gas drilling industry, energy and power industry, iron and steel metallurgy industry, biomedicine industry, textile & chemical fiber industry and military equipments and other fields.
We offer the high quality filters and filtration projects for the global customers to save the expensive operating cost.
Sinofiltec technology Co.,Ltd would like to communicate and cooperate with customers widely at home and abroad, and truly to creat more value for our customers, truly to achieve the best use of things and the value for money !
- Company Name: Henan Sinofiltec Technology Co.,Ltd
- Representative: Jia rui qing
- Product/Service: Filter Medium , Wedge Wire Filter Elements , Filter Assemblies , Hydraulic Filters , Sintered Wire Mesh , Water Filters
- Capital (Million US $): 5000000RMB
- Year Established: 2018
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 91% - 100%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 5
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 30,000-50,000 square meters
- Factory Location: Xiyi street, No.2 indutrial park of the high & new industrial development zone
- Contact Person: Mr. Keven Jia
- Tel: 86-373-7039618
Premium Related Products