waste oil to diesel and gasoline, profitable waste/used engine oil refinery equipment with no pollution
Basic Info
Model No.: BZL-50
Product Description
waste oil to diesel and gasoline, profitable waste/used engine oil refinery equipment with no pollution
company profile
We are one of the professional manufacturers specializing in tyre/plastic/rubber Pyrolysis Plant, oil distillation plant and carbon black processing plant. We have been in this field since 1998, which enables us to provide you high-end engine oil refinery equipment and first-class after sale service
Quick details
1.Wide range of raw materials can be distilled in the engine oil refinery equipment
-Raw oil extracted from waste plastic/tyre/rubber
-Waste engine oil
-Waste crude oil
-Waste washing oil
-Waste lubricating oil
2.thermometer, pressure gauge, safety valve and hydroseal ensure the whole process safe
3.Specially designed dedusting system and well-sealed parts contributes to environmental protection
4.Unique condensers and vacuum device makes our pyrolysis oil distillation machine highly efficient
5. Multiple methods to dispose of the distilled oil ensures the final oil is of high quality
6.the complete set of unit produce no smoke and no smell
3D drawing
Data sheet
Type | BZJ-06 | BZJ-10 | BZL-25 | BZL-50 | BZL-100 | |||
Raw material | Waste Oil, Raw oil, Waste Engine Oil, Waste Raw Oil, Waste Washing Oil | |||||||
Structural form | Vertical belt tower | |||||||
Size of reactor(mm) | (1600*4400)mm | (2200*5100)mm | (3000*5000)mm | (3600*6000)mm*2 | (3600*6000)mm*2 | |||
24-hour Capacity | 6T | 10T | 25T | 50T | 100T | |||
Rate of oil yield | 70%-80% | 70%-80% | 90% | 90% | 90% | |||
Power | 20.0 KW | 20.0 KW | 38.0 KW | 50.0 KW | 80.0 KW | |||
Working form | Intermittent operation | Intermittent operation | Continuous operation | Continuous operation | Continuous operation | |||
Heating mode | Hot air | Hot air | Hot air | Tubular heater | Tubular heater | |||
Material of reactor | Q245R/Q345R boiler plate | |||||||
Heating material | Coal, charcoal, fuel gas, fuel oil | |||||||
Thickness of reactor | 16mm | |||||||
Rotate speed of reactor | 0.4-0.8 turn/minute |
The total producing consumption
1. Power: 120kw/hour in total (but it is not every device start at the same time).
2.Cooling circuit water: 50m3/hour in total (the water can be recirculated and the more the water flow, the better the cooling down).
3.Fuel for heating:
30——40KG coal for processing one ton raw oil for average.
20——30KG diesel for processing one ton raw oil for average.
4.Space for machine: 3000----3500 square meter (the smallest space).
5.Workers or shift: 4 to 6 workers which can be divided by two groups
Working process
Pump the raw oil for further processing into reboiler, catalyse and heat in a decompression state to distill oil vapour, make the oil vapour pass the condenser, then the part that can be liquefied will be condensed into oil product, and the part that cannot be liquefied will be sent into air heater for burning
Energy-saving
1.Continuous feeding with automatic feeder, no gas leak
2.The exhaust gas will be recycled for reactor heating.
Security
The security of main device, the main components of the exhaust gas that cannot be liquefied are alkanes class from C1to C4,whose direct burning is dangerous. Therefore, we shall first make them pass water seal of the first safety device before burning up them as fuels, and further make them pass the gas burner of the second safety device; then the safe production shall be realized completely.
Environmental-friendly
1.Exhaust gas
By means of full combustion in water seal and gas burner of safety devices, the pollution of exhaust gas shall be eliminated and a large amount of fuel shall be saved.
2.Waste liquid
Faintly acid waste water shall produce in the course of treatment of oil products (about 50 kg waste water each ton oil, small volume and tractable); after neutralization by adding faintly alkaline liquor, the neutral waste water shall be harmless with three-grade filtration and be discharged into special evaporation processor to vapor (heat source is the flue residual heat of main processor).
3.Waste solid
The waste plastic will have some solid residues, which probably accounts for 5% to 10% of the weight of waste plastic, after being catalyzed and thermally cracked. The main component of these residues is asphalt and it can be sold as the raw material of producing asphalt in the market.
High quality and output of oil
1.Improving the oil output by another 5% compared to the same machine
2.We adopt new type of condensers which can further ensure and improve the oil yield efficiency
3.Unique designed catalyzer and other process to deal with the purified oil,which not only reduces sulfur content and density of oil, but also improves its flavor and color.
Other photos related to the engine oil refinery equipment
After sale service
1. Delivery time- It will be 40 working days after we receive the deposit
2. Warranty: The warranty period for reactor is 3 years, and other part except spare parts is 1 year. The problem caused by wrong operation of workers shall not be responsible by our company.
3. Installation and Training:Our company will send one technician for each set of the engine oil refinery equipment for guiding your installation, testing the machine and training your workers.And the charge will be USD1500.
The installation period shall be one month; otherwise, you have to pay extra salary for the technician with the price of RMB400.00 per day (equals USD63.40 per day).
15 years' manufacturing and selling experience enable us to provide good performance products and first-class service for you.
Any questions about our engine oil refinery equipment, please feel free to contact us!!!
Look forward to our cooperation
waste oil to diesel and gasoline, profitable waste/used engine oil refinery equipment with no pollution
Product Categories : Oil Distillation Machine
Premium Related Products